Direct Torque Control of BLDC Motor with Constant Switching Frequency

Adeline Lukar Herlino, Auzani Jidin, Tole Sutikno, Mustafa Manap, Muhd Khairi Abdul Rahim, Ahmad Faiz Noor Azam

Abstract


Direct torque control (DTC) has become a popular technique for brushless motor control because it provides fast dynamic torque response. Hysteresis band control is the most popular techniques used in the DTC BLDC motor drive caused the simplest technique. However the conventional DTC have problems as switching frequency that varies with operating conditions and high torque ripple. This paper presents direct torque control (DTC) of BLDC motor with constant switching frequency torque controller. The torque ripple will get reduced by this method constant switching frequency operation. The feasibility of this method in minimizing the torque ripple is verified through some simulation results.

Keywords


component; Direct torque control (DTC), constant switching frequency, Brushless DC (BLDC).

References


J. N. Nash, "Direct torque control, induction motor vector control without an encoder," Industry Applications, IEEE Transactions on, vol. 33, pp. 333-341, 1997.

F. Blaschke, "The principle of field orientation as applied to the new Transvektor closed-loop control system for rotating field machines.," pp. 217-220, 1972.

I. Takahashi and T. Noguchi, "A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor," Industry Applications, IEEE Transactions on, vol. IA-22, pp. 820-827, 1986.

John R G Schofield, (1995) “Direct Torque Control – DTC”, IEE, Savoy Place, London WC2R 0BL, UK.

L.Tang, L.Zhong, M.F.Rahman, Y.Hu,(2002)“An Investigation of a modified Direct Torque Control Strategy for flux and torque ripple reduction for Induction Machine drive system with fixed switching frequency”, 37th IAS Annual Meeting Ind. Appl. Conf. Rec., Vol. 1, pp. 104-111.

M. F. Rahman, M. E. Haque, T. Lixin, and Z. Limin, "Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive and their remedies," Industrial Electronics, IEEE Transactions on, vol. 51, pp. 799-809, 2004.

T. Lixin, Z. Limin, M. F. Rahman, and H. Yuwen, "A novel direct torque control for interior permanent-magnet synchronous machine drive with low ripple in torque and flux-a speed-sensorless approach," Industry Applications, IEEE Transactions on, vol. 39, pp. 1748-1756, 2003.

L. Zhong, M. F. Rahman, W. Y. Hu, and K. W. Lim, "Analysis of direct torque control in permanent magnet synchronous motor drives," Power Electronics, IEEE Transactions on, vol. 12, pp. 528-536, 1997.

A. Jidin, N. R. N. Idris, A. H. M. Yatim, T. Sutikno, and M. E. Elbuluk, "Simple Dynamic Overmodulation Strategy for Fast Torque Control in DTC of Induction Machines With Constant-Switching-Frequency Controller," Industry Applications, IEEE Transactions on, vol. 47, pp. 2283-2291, 2011.

A. B. Jidin, N. R. B. N. Idris, A. H. B. M. Yatim, M. E. Elbuluk, and T. Sutikno, "A Wide-Speed High Torque Capability Utilizing Overmodulation Strategy in DTC of Induction Machines With Constant Switching Frequency Controller," Power Electronics, IEEE Transactions on, vol. 27, pp. 2566-2575, 2012.

A. Jidin, N. R. N. Idris, A. H. M. Yatim, A. Z. Jidin, and T. Sutikno, "Torque ripple minimization in DTC induction motor drive using constant frequency torque controller," in Electrical Machines and Systems (ICEMS), 2010 International Conference on, 2010, pp. 919-924.

A. Jidin, N. R. N. Idris, A. H. M. Yatim, T. Sutikno, and M. E. Elbuluk, "An Optimized Switching Strategy for Quick Dynamic Torque Control in DTC-Hysteresis-Based Induction Machines," Industrial Electronics, IEEE Transactions on, vol. 58, pp. 3391-3400, 2011.

N. R. N. Idris, A. H. M. Yatim, N.D. Muhamad and T. C. Ling, (2003) “Constant frequency torque and flux controllers for direct torque control of induction machines”, 34th Annual IEEE Power Electronics Specialist Conference, PESC’03, Vol. 3, pp. 1095-1100.

L. Yong, Z. Q. Zhu, and D. Howe, "Direct torque control of brushless DC drives with reduced torque ripple," Industry Applications, IEEE Transactions on, vol. 41, pp. 599-608, 2005.

S. B. Ozturk and H. A. Toliyat, "Direct Torque Control of Brushless DC Motor with Non-sinusoidal Back-EMF," in Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International, 2007, pp. 165-17


Full Text: PDF

Refbacks

  • There are currently no refbacks.